Shop Catalog ->
Valves ->
Proportionating Solenoid Valve Driver Module

Proportionating Solenoid Valve Driver Module

Image for illustrative purposes only, actual product may vary.

Alternative Views:

Pulse width modulated Driver Modules regulate the power supplied to the Proportionating Electromagnetic Valves based on a reference signal. Set-point signals, 0-5 Vdc or 4-20 mA, input are employed to control the output pulse width modulated voltage at a fixed frequency (≈30KHz) and amplitude. Incoming power to the valve coil is applied and discontinued for predetermined periods of time by a low loss solid state switching element. The wide range of power input features conveniently accommodates 12 to 32 Vdc sources. The Auto-Select feature of the Driver Module recognizes the type of reference signal received and defaults to 0 - 5 Vdc if both signals are provided.

Power Supply for Driver Module Sold Separately

Set-point signals control output pulse width modulated voltage and amplitude
Conveniently accommodates 12 to 32 Vdc sources
Internal resettable fuse protects electronics
Rectifier circuits prevents polarity reversal damage
Jumper selectable ouput power allows choice of dc voltage range

Specifications:		6ASD Proportionating Solenoid Valve Driver Module
Connection:		9-pin male "D" subconnector for input/output signals.
Power Input Required:		+12 to 30 Vdc 1A @ 12 Vdc, 0.5A (not supplied) @ 24 Vdc via 9-pin “D”-connector or dc power jack (center positive).
Input Signal:		Auto-Select feature allows circuit to recognize which analog input reference (0 to 5 Vdc or 4-20 mA) signal is provided.
TTL On/Off:		Jumper selectable LOW (0 Vdc) OFF-HIGH (5 Vdc) on, or reverse, to select valve ON/OFF status.
Valve Output Power:		Jumper selectable to +15, +22, and +29 Vdc with adjacent potentiometer to obtain ±2 Vdc.
Fuse Rating:		An internal resettable 1.6A fuse protects the electronics on the power input.
Polarity Protection:		Internal rectifier circuit protects from reversed polarity on the power input.
Operating Temperature:		32^°F (0^°C) to 122^°F (50^°C).
Dimensions:		3"(7.62mm) Wide x 3"(7.62mm) Deep x 1"(25.4mm) High.
CE Compliance:		EMC Directive 89/336/EEC EN55011:1991 Group 1, Class A EN50082-2:1995.