|
Specifications:
|
|
DPC Series Precision Digital Mass Flow Controllers
|
|
Flow Medium:
|
|
Please note: DPC Mass Flow Controllers are designed to work only with clean, non-corrosive gases. Never try to control flow rates of liquids with any DPC product.
|
Calibrations:
|
|
Performed at standard conditions [14.7psia (101.4kPa) and 70°F (21.1°C)] unless otherwise requested or stated. |
|
Environmental (Per IEC 664):
|
|
Installation Level II; Pollution Degree II.
|
|
Flow Accuracy (Including Linearity):
|
|
±(0.5% RD + 0.2% FS) at calibration temperature and pressure conditions after tare.
|
Repeatability:
|
|
±0.2% of full scale.
|
Flow Temperature Coefficient:
|
|
0.05% of full scale/ °C or better.
|
Flow Pressure Coefficient:
|
|
0.01% of full scale/psi (6.895kPa) or better.
|
Typical Flow Response Time:
|
|
Default 150 ms (adjustable).
|
Instrument Warm-Up Time:
|
|
<5 Seconds.
|
Maximum Controllable Flow Range:
|
|
133% of Full Scale
|
Operating Range/Turndown Ratio:
|
|
0.5% to 100% of Full Scale/200:1
|
Mass Reference Conditions STP:
|
|
70°F & 14.696 PSIA (other available on request).
|
Maximum Internal Gas Pressure (Static):
|
|
120 PSIG.
|
Maximum Instantaneous Differential Pressure Across Differential Sensor:
|
|
12 PSID.
|
Proof Pressure:
|
|
145 PSIG.
|
Valve Type:
|
|
Normally Closed.
|
Operating Temperature:
|
|
-10 to 60°C (14 to 140°F).
|
Mounting Attitude Sensitivity:
|
|
None.
|
Relative Gas Humidity Range:
|
|
0 to 100% (Non-Condensing).
|
Ingress Protection:
|
|
IP40.
|
|
Analog Output Signals:
|
|
Linear 0-5Vdc (3000 ohms minimum load impedance);
Linear 0-10Vdc (5000 ohms minimum load impedance);
Linear 4-20mA (550 ohms maximum load impedance) with power supply ≥ 14Vdc
|
|
Analog Set Point (Input Signals):
|
|
Linear 0-5Vdc, 0-10Vdc (100K input impedance)
Linear 4-20mA (250 Ohm input Impedance).
|
|
Transducer Input Power:
|
|
12 to 26 Vdc,150mV maximum peak to peak output noise. Power consumption: 250mA maximum for DPC07, DPC17; 300mA Maximum for DPC37, DPC47.
24 to 26 Vdc for DPC57, DPC67, DPC77. Power consumption 650mA maximum, circuit boards have built-in polarity reversal protection: 300mA for DPC07, DPC17, DPC37, DPC47 (750mA for DPC57, DPC67 and DPC77).
|
|
Digital Ouput Signals:
|
|
Standard RS-232 or RS-485 (user selectable). Optional Modbus over isolated RS-485 transceiver.
|
|
**Materials In Fluid Contact:
|
|
316 stainless steel, 416 stainless steel, high temperature polyamide, alumina ceramic, poxy, silicone, glass, gold. FKM O-rings standard (Optional Buna-N®, EPR® or FFKM O-rings available upon request).
|
